Frequency Usage Table by Products

Each Digi radio modem uses as little of the available RF spectrum as possible so as to minimize susceptibility to interference from other RF systems as well as to minimize the impact of Digi transmissions on RF systems already operating in the area.

Here is a table showing the specific frequencies used by Digi radio modems by product family:

Product Family First Frequency
(MHz)
Last Frequency
(MHz)
Frequency spacing
(KHz)
9XStream (X09) 910.5 917.7 300
9XTend (XT09) 905 925 350
9XTend (Australian XTH9) 915.75 927.265 350
9XStream (XH9) 920.0 927.2 300
24XStream (X24)
(25 channel)
2450.15 2459.75 400
XBee SX  900 MHz 902.5 927.5 250
XBee SX 868 MHz 863.15 869.85 200
XBee PRO SXC 910.5 917.7 300
XBee PRO 900 HP 902.4 927.6 400
XBee 2.4 GHz products 2405.0 2480.0 5000

The XPress Ethernet Bridge is designed to automatically select the best frequency for radio transmission. There may be circumstances when the user wishes to restrict the operation of the XEB to a subset of the 902-928 band.

DIP Setting Channel Frequency
2 ON / 3 OFF 1,2,3 or 4 903-909 MHz
2 OFF / 3 ON 5,6,7 or 8 911-917 MHz
2 ON / 3 ON 9,10,11 or 12 919-925 MHz
Last updated: Aug 23, 2017

Filed Under

GatewaysRFRF Dev kits

Recently Viewed

No recently viewed articles

Did you find this article helpful?